Does your visor become foggy during your ride? If your answer to this question is a yes, there are possible solutions on how to stop helmet visor fogging
It is very dangerous when the visor of your helmet forms a fog during your ride. This would result in a crash with another vehicle.
To survive from a dangerous road accident, there are possible solutions to stop helmet visor fogging up
In this guide, there are definite things for you to follow on:
How to Stop Helmet Visor Fogging
1) Open the Ventilation System
The main reason behind the buildup of fog on your visors is due to lack of ventilation. This causes to build the moisture onto your visor resulting in fogging. How to stop helmet visor fogging is to open the ventilation system. This helps to prevent the visor from fogging up. If you are anxious about water entering your eyes, you need to open the visor slightly with just the use of the notch on the visor. If your helmet has chin vents, open these vents to prevent fogging. If your helmet has chin bar, even better as you can remove it for having a proper amount of ventilation.
2) Invest in Pin Lock Visors
Some helmets come with pin lock visors, which are the little pins to insert the visor lens to stop helmet visor fogging up. Some headgears supply with pin lock visors and others require buying separately. These little pins refer to as pin locks to seal air to avoid the buildup of humidity. If you ride frequently, you need to invest in some good pin lock visors to insert the holes of your helmet visor. You can even use inserts to seal the holes of the visor to avoid fogging up during your ride.
3) Wear an Anti-fogging Mask
Your breath causes the visor to fog up during your ride resulting in a fatal road accident. How to stop crash helmet visor fogging up depends on the breath you put into your visor. To prevent this issue is to wear an anti-fogging mask to cover your nose and mouth. Anti-fogging masks are suitable for all full face helmets and speedy riders. Not only an anti-fogging mask helps to prevent fogging but helps to filter the pollution outside and keeps the air clean. Wearing an anti-fogging mask helps to prevent dirt and dust entering your face.
4) Use Water Repellent Products
If you are a frequent rider, then your visor can build up with fog and other debris happening on the environment. The best solution on how to stop helmet visor fogging is to use water repellent products. These products contain chemicals, which helps to keep your visor clean inside and outside. Water repellent products come in wipes and liquids to keep your visor clean and free from fog. Besides, these products help to keep the water away during rainy weather.
5) Use Anti-fog Sprays
If water repellent products are inconvenient to get rid of fog from your visor, you can use anti-fog sprays. Anti-fog sprays are easily available which helps to evaporate the buildup of moisture and resulting in a clear view visor. As this solution is temporary, you need to apply each time the visor builds up with fog. To use the spray is to clean your visor and apply evenly. Anti-fog sprays are suitable for those riders who rarely ride in wet conditions. Using anti-fog sprays depends on how often you hit the road.
6) Open the Visor
This is the most obvious solution on how to stop snowmobile helmet visor fogging. Many riders assume that closing the visor only protects any debris from entering the eyes. However, opening the visor helps to stop fogging up during damp conditions. This ensures that all of the air you breathe sends outside the helmet. If you ride at high speed, the huge amount of ventilation will force the moisture away, keeping your visor free from fog.
For this guide on how to stop helmet visor fogging is to maintain the temperature of your visor before you hit the road. This helps you to make sure that your visor is not building up with too much condensation. The reason behind the buildup of fog is due to the rain and the cold winds. If you ride frequently, it is best to monitor the weather patterns before you hit the road. This will help to stop helmet visor fogging up.
8) Use Anti-fog Inserts
One of the best solutions on how to stop your helmet visor fogging up is to use anti-fog inserts. These inserts are thin plastic sheets, which contains a hydrophilic layer that absorbs moisture to keep it clean during your ride. These anti-fog sheets can affix to the inner side of the visor, which helps to prevent the condensation from forming inside. If you want a clear and long-lasting visor, use anti-fog inserts
Clean with a Dishwashing Soap
Cleaning with the dishwashing soap is the cheapest solution to avoid the buildup of fog on your visor. One of the easiest ways on how to stop helmet visor fogging is to clean with dishwashing soap. All you have to do is apply a discrete amount of dishwashing soap onto the rag and apply it inside the visor. Then take another rag and wipe the visor until it becomes clear. If you do this right, you will achieve the result that it would not fog up. Even if you breathe on it directly.
Here are the solutions on how to stop helmet visor fogging. These tips will provide you to prevent your helmet visor from fogging up during your ride. If you want to protect yourself from road distractions, you need to follow these tips above to stop helmet visor fogging up.
Having a foggy visor distracts your ride; these guides will allow you to get rid of fog building up on your visor. Whether you use an anti-fog spray or wearing an anti-fog mask, these solutions help you to look further ahead of the road and take the precautions of head survival. If you have not cleaned your visor, now is the time.
So use this guide on how to stop helmet visor fogging and have a safe ride!