Getting on the backseat requires care and attention to avoid further accidents during the ride. For a passenger, getting on the bike means putting the rider’s life at risk.
To make the ride safer for the rider and the passenger, there are useful guides to know how to get on a motorcycle with a backrest.
To get onto the backseat of the bike, it is important to take the safety seriously before getting on the motorcycle.
To educate about the safety gear for the rider and the passenger is to read these guides below:
As a Rider: How to Get on a Motorcycle with a Backrest Step by Step
Have your safety gear
It is your responsibility to wear appropriate protective gear. The helmet is the most important headgear. Other protective gears such as gloves, jackets and boots count to a protective safety from impacts. If you are riding with a passenger, you must wear appropriate protective gear to bring awareness of road safety. To protect from fatal accidents is to have your safety gear ready before you get onto your bike.
The type of bike you have
The type of bike you ride depends on the size of a passenger seat. How to get on a motorcycle with a backrest depends on whether the passenger is sitting comfortably onto the backrest. Having a small backseat would not do any good to allow sufficient space for the passenger to sit on it. Some touring and cruiser bikes have passenger seats, which look like recliners. Sportbikes and other high-performance motorcycles have rear seats that provide little space. If your bike has a backrest, this works even better for the passenger to rest onto the backseat.
Where you will ride and when
It is crucial to plan the ride and do consider the protective gear according to the weather. To ride with a passenger is to monitor the weather and dress the gear accordingly. Some newbies will have a tough experience riding on different conditions. But once you ride, you will get used to feeling a lot of temperature variation.
Learn to signal each other while riding
When riding with a passenger at a high speed, it gets tough to communicate with the passenger. To ensure a safe ride is to learn to signal each other on the road, especially at an extreme speed. Educate the passenger on signalling when to stop, slow down and speed up. To make communication easier is to wear a Bluetooth helmet.
There are such gestures that mean a certain thing when signalling each other while riding:
– One tap on the right shoulder- I want to stop when it is convenient.
– Two taps on the right shoulder- It is urgent.
– Three taps on the right shoulder- Stop right now!
– One tap on the left shoulder- Look at this!
– Tapping both sides of the shoulders – I have a problem.
– Thumbs-up- I am having fun.
– Thumbs-down: I am not having fun.
As a passenger:
Wear appropriate gear
Not only the rider needs to wear protective gear, but the passenger also needs to wear appropriate gear as well. To put your risk for the rider is to protect yourself from the crash. The helmet is not the only protection from impacts, other parts of the body need protection as well. To become a good passenger is to wear protective gear.
Get onto the motorcycle in the right way
You get onto the passenger seat until the rider is stable with the bike upright and feet onto the ground. The rider could also engage the brake to keep the bike from rolling. To get onto the passenger seat correctly is to pop out the footpegs by getting on the nearest footpeg first and swing your leg over onto the other.
Try not to hang onto the rider
Wrapping your arms around the rider might seem romantic. As a safety purpose, it is not ideal as you are putting the weight onto the rider and affecting the ability to control the bike. To avoid that is to stabilize yourself by placing your hands on the tank, even when stopping. If you cannot reach the tank, just place your arms around the rider’s waist. Never place your hands at the shoulders.
Use the foot-pegs
To be a good passenger is to keep your weight distributed evenly between the pegs and the backseat, rather than putting all of your weight onto the seat alone. This helps to become more stable when riding on bumpy terrains or rough patches on the road. Never put your feet down during the ride unless you get off the bike completely.
Do not lean into turns just because the rider does
When the rider takes turns or any circular motion, it will naturally lean into turns. But do not to over lean the turns. This will lose control for the rider. To lean the turns naturally is to look over the rider’s shoulder in the direction you are turning.
Only get off the bike when the rider tells you to
Getting off the motorcycle immediately can put a lot of weight on the bike. This causes to collapse the bike after disembarking. You must only get off the bike when the rider tells you to.
Watch out for exhaust pipes
The exhaust pipes located near the back of the bike under the passenger seat. So be careful not to make contact when getting on and off the bike. The exhaust pipes become extremely hot after the ride. To add on to this, the chain and sprockets exposed in the back of the bike. This part of the motorcycle can catch any loose clothing or untied shoelaces. It is best not to hang on these such areas. Do check to make sure nothing is hanging that can catch your loose clothing or untied shoelaces during the ride.
Here are the useful guides on how to get on a motorcycle with a backrest. You can see these useful tips will provide you to ensure a safe ride without putting each other’s lives in danger. You must follow these tips on getting on the bike safely without any distractions or putting the rider’s life at risk.
Do make sure you educate yourself about road safety and learn these tips seriously. The more you learn, the safer you will be at the backseat.
So read these guides above and enjoy the ride!