Are you having trouble with changing the oil of your bike? If your answer is yes, we have a guide on how to change motorcycle oil.
Oil change for motorcycles is not as hard as you think. All you have to do is follow the procedures carefully. Riders change their oil to ensure better fuel combustion for a smooth ride. How often you ride depends on the amount of dirt and gunk building up in your internal components.
Motorcycle oil change requires care to avoid fuel combustion of the internal components of your bike. How to change motorcycle oil depends on your engine stroke and the duration of your ride.
For this process for how to change motorcycle oil, gather some equipment.
How to Change Motorcycle Oil Simple & Easy Guide
To know how to change motorcycle oil, it is essential to change the oil according to your engine type to avoid insufficient fuel combustion. To change the oil is to follow the instruction.
Equipment you need:
- A bottle of oil
- A funnel
- A socket wrench
- A rubber mallet
- A new oil filter
- 2-3 flannel cloth
- A metal tray
1) Unscrew the cap
To begin the process for how to change motorcycle oil is to unscrew the engine’s oil cap. Do not remove in a hurry, as this would result in oil spillage. Make sure your bike stays immobile to change the oil in ease.
2) Warm the engine
Turn on the bike and let it warm up for about 5-10 minutes. This helps to drain the oil when it is hot enough to remove the old oil. The warmer the oil, the easier it is to drain the oil from your motorcycle. Do take care to handle the warm oil, never touch the warm oil!
3) Remove the drain bolt
Then remove the drain bolt by using the socket wrench. If you have trouble removing it, use a rubber mallet on the socket handle. After you have done that, use a metal tray underneath the bike to drain out the oil.
Note: If reaching the drain bolt is difficult, you can use a motorcycle rear stand to reach ease.
4) Remove the old oil filter
Remove the old oil filter by hand. If your motorcycle has a head nut on it, it should be easy to remove. You can use a socket wrench to remove the oil filter; to do this is you need to turn the wrench anti-clockwise.
5) Wait for the oil to drain
Sit and wait for the oil to drain completely. Never touch any parts of the hot engine and do not touch the draining oil, as this would cause spillage! Then use a flannel cloth, clean the drain bolt and the oil filter to avoid any oil contaminant.
6) Install the new oil filter
To install the new oil, use your finger and dip the new oil onto the new oil filter’s O-ring. This will help to ensure a nice seal when installing the new oil filter. Most oil filters have equipped with a nut head. If you have trouble removing the filter by hand, use the socket wrench again to remove the old filter. Install the new oil filter by turning anti-clockwise.
Note: Make sure you use the new oil of the brand you have used before. Never switch from a different oil brand as this would cause fuel combustion. Some oil brands only accommodate a definite ring type of the oil filter. If you have an O-ring filter, look for an oil brand that only works for O-ring. It is optional to seal the new washer.
7) Fill in the new oil
Fill in the new oil with the use of a funnel. Add it according to the user’s manual for your engine capacity. After filling in your motorcycle, check to see if the oil is full enough for your bike.
Do not overfill the new oil. Just fill in about two-thirds. Then start the engine, if you feel the pressure of the fuel is light and it is not enough, fill in the oil again.
After you have filled it again, start the engine of your bike.
Enjoy the ride!
Tips and Advice:
- When you change the oil, make sure the brand of the oil you use must be the same as the previous oil you have used before. Never change your oil with a different brand, as this would cause fuel explosion. You can change the viscosity of your bike but not with a different brand. Do take care of this matter!
- If you have a problem reaching the oil filter or removing the drain bolt, use a motorcycle rear stand to change the oil of your bike with ease. This will help the bike to avoid collapsing in the oil changing process.
- When waiting for the oil to drain completely, make sure you put the excess oil on one side to avoid slipping and spillage.
- Before you apply the new oil, make sure the new oil filter is clean and free from other oil contaminants. If there is any oil leaking onto your bike, use a clean cloth and wipe off any excess oil. This will help to add the new oil easily.
- In this guide on how to change motorcycle oil, make sure you fill the oil according to the manufacturer’s instructions and do double-check that you use the same brand as your old oil. Never switch from one oil brand to another!
- How often to change motorcycle oil depends on how often you ride and the viscosity of your oil. If you feel, your oil is running trouble in keeping your ride smooth. It is time to change your motorcycle oil.
- Make sure you maintain and check your oil regularly for any signs of leaking or any issues that would cause fuel combustion. You will know how to change oil on motorcycle.
- If you want to change motorcycle oil at the workshop, ask the mechanic about the oil brand you use and the engine stroke of your bike
Here is the guide on how to change motorcycle oil. Checking your oil is important to keep the fuel and engine running smoothly throughout the ride. Not maintaining the engine of your motorcycle would result in unexpected fuel combustion and inefficiency. Oil change for motorcycles requires attention in keeping the internal components for longer.
How often to change oil on motorcycle depends on the engine stroke and the distance, you ride. To end the struggle on how to change motorcycle oil, just simply follow the instructions above.
To survive for long durations, you must know how to check motorcycle oil by looking at the oil gauge. If you face issues with your fuel, then you need to change your motorcycle oil. If you look after the engine, you will enjoy a smooth ride.
All you have to do is to grab some equipment at your garage and follow the instructions on how to change motorcycle oil
Just fill in the oil, start the engine and enjoy the ride!
Read More Articles: